Time Displays and other Access Control Solutions - Cypress Integration Solutions.

Cypress Time Displays, Reader Interfaces, Expansion Modules and Access Control Solutions | EXP-1000

Cypress Integration Solutions is a recognised leader in the design and manufacture of electronic security products and technologies.

Windmill supplies Cypress Access Control Solutions and products to customers through out the UK and Worldwide.

Access Control Solutions: FOR THE INTEGRATORS TOOLBOX

See the Cypress product catalogue of access control products we offer here.

    Including:
  • Wireless Handheld Reader
  • Reader Extenders
  • Reader Interface
  • OSDP
  • Data Converters
  • Wiegand Splitters
  • Time Displays
  • Barcode Scanners
  • Expansion Modules

Order below or get in touch here with our helpful team.

Time Displays

Cypress synchronised display clocks are used to display the time from a master clock panel or access control system. Using an RS-485 twisted pair network, up to 32 clocks can be wired together in series and driven from a single time source. Clock drivers are available to provide compatibility with various access control panels, as well as an RS-232 driver for general computer applications.

For everyday solutions for access control see the full Cypress products range here!

See other products in this category

Cypress Integration CVX-1300 Universal Data Converter

Handheld mobile reader

Cypress Computer Systems, Inc

Downloads

PDF Download

Cypress lifetime warranty

PDF Download

EXP-1000 Manual

PDF Download

EXP-1000 Spec Sheet

Time Displays and More Access Control Solutions

Currency:  GBP | USD | EUR
Time Displays

Indoor clock with 4 inch High intensity LED digits. (requires CCX-1250 driver) overall dimension 13.5 x 7.5 x 2.25 inch (approx). Time Display Products

CCK-3104

Indoor clock with 4 inch High intensity LED digits. (requires CCX-1250 driver) overall dimension 13.5 x 7.5 x 2.25 inch (approx). Time Display Products

836,99 €

Clock Driver

Time Display Driver - RS-232 panel interface, RS-485 Time Display interface. Supports CASI Micro 5 and Sensormatic ASCII Serial protocols. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50″ x 2.90″ x 1.00″ (approx).

CCX-1350

Time Display Driver - RS-232 panel interface, RS-485 Time Display interface. Supports CASI Micro 5 and Sensormatic ASCII Serial protocols. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50″ x 2.90″ x 1.00″ (approx).

324,00 €

CCX-1351-Supports time zone offset

Time Display Driver - RS-232 panel interface, RS-485 Time Display interface. Supports CASI Micro 5 and Sensormatic ASCII Serial protocols and time zone offset. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50 x 2.90 x 1.00 inch (approx).

CCX-1351

Time Display Driver - RS-232 panel interface, RS-485 Time Display interface. Supports CASI Micro 5 and Sensormatic ASCII Serial protocols and time zone offset. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50 x 2.90 x 1.00 inch (approx).

324,00 €

Time Display Driver - RS-485 panel interface, RS-485 Time Display interface. Supports Mercury 1, Mercury 2, NexWatch 1, and NexWatch 2 protocols. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50 x 3.10 x 2.10 (inches approx).

CCX-1360

Time Display Driver - RS-485 panel interface, RS-485 Time Display interface. Supports Mercury 1, Mercury 2, NexWatch 1, and NexWatch 2 protocols. Durable aluminum housing. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50 x 3.10 x 2.10 (inches approx).

351,00 €

Reader Interface

Serial Interface Module RS-485 - Allows one reader and associated door/gate hardware to be located up to 10000 feet away from a RS-485 controller using the SIO protocol. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of unit: 4.50″ x 2.90″ x 1.00″ (approx).

SIO-7100

Serial Interface Module RS-485 - Allows one reader and associated door/gate hardware to be located up to 10000 feet away from a RS-485 controller using the SIO protocol. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of unit: 4.50″ x 2.90″ x 1.00″ (approx).

508,51 €

No Enclosure-SIO-7100-BRD

SIO-7100-BRD-Serial Interface Module RS-485 - Allows one reader and associated door/gate hardware to be located up to 10000 feet away from a RS-485 controller using the SIO protocol. Requires 8 - 16 VDC. No enclosure. Overall dimensions of unit: 4.50″ x 2.90″ x 1.00″ (approx).

SIO-7100-BRD

SIO-7100-BRD-Serial Interface Module RS-485 - Allows one reader and associated door/gate hardware to be located up to 10000 feet away from a RS-485 controller using the SIO protocol. Requires 8 - 16 VDC. No enclosure. Overall dimensions of unit: 4.50″ x 2.90″ x 1.00″ (approx).

490,50 €

Serial Interface Module TCP/IP - Allows one reader and associated door/gate hardware to be located anywhere on the IP network using the SIO protocol. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of unit: 4.50″ x 3.10″ x 2.10″ (approx).

SIO-7300

Serial Interface Module TCP/IP - Allows one reader and associated door/gate hardware to be located anywhere on the IP network using the SIO protocol. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of unit: 4.50″ x 3.10″ x 2.10″ (approx).

702,00 €

Expansion Module

EXP-1000

REPLACEMENT PART SUPREX® Reader Expansion Module for SPX and HHR products (not compatible with SPX-1300). RS-485 Interface. Field selectable for either Central or Remote unit operation. Supports reader and 2 relays with LED, door hardware and associated I/O. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of unit: 4.50” x 2.90” x 1.00” (approx). Firmware version 400 and newer are not compatible with SPX units made before May 2016 (Serial Number 126055 or lower).

301,50 €

EXP-1000-BRD

REPLACEMENT PART SUPREX® Reader Expansion Module for SPX and HHR products (not compatible with SPX-1300). RS-485 Interface. Field selectable for either Central or Remote unit operation. Supports reader and 2 relays with LED, door hardware and associated I/O. Requires 8 - 16 VDC. No enclosure. Overall dimensions of unit: 4.50” x 2.90” x 1.00” (approx). Firmware version 400 and newer are not compatible with SPX units made before May 2016 (Serial Number 126055 or lower)

274,51 €

EXP-2000

SUPREX® Reader Expansion Module for SPX and HHR products (not compatible with SPX-1300). RS-485 Interface. Includes Central and Remote units. Supports reader and 2 relays with LED, door hardware and associated I/O. Requires 8 - 16 VDC. Durable aluminum housing. Overall dimensions of each unit: 4.50” x 2.90” x 1.00” (approx). Firmware version 400 and newer are not compatible with SPX units made before May 2016 (Serial Number 126055 or lower).

594,00 €

EXP-2000-BRD

SUPREX® Reader Expansion Module for SPX and HHR products (not compatible with SPX-1300). RS-485 Interface. Includes Central and Remote units. Supports reader and 2 relays with LED, door hardware and associated I/O. Requires 8 - 16 VDC. No enclosures. Overall dimensions of each unit: 4.50” x 2.90” x 1.00” (approx). Firmware version 400 and newer are not compatible with SPX units made before May 2016 (Serial Number 126055 or lower).

544,49 €

Barcode Scanner Package with Wiegand Interface

Currency:  GBP | USD | EUR
Honeywell Optical barcode scanner with CVX-1300 data format converter with custom wiring harness.

Barcode Scanner with Data Format Converter - Honeywell Optical barcode scanner with CVX-1300 data format converter with custom wiring harness. Converter requires 8 - 16 VDC, barcode scanner requires 5 VDC.Includes 5 VDC power supply. Overall dimensions of barcode scanner 2.9″ x1.9″x1.0″, converter - 4.25″ x 3″ x .75′ (approx). Overall dimensions of converter: 4.50&Prime x 2.90&Prime x 1.00&Prime (approx).

TSP-2104

Barcode Scanner with Data Format Converter - Honeywell Optical barcode scanner with CVX-1300 data format converter with custom wiring harness. Converter requires 8 - 16 VDC, barcode scanner requires 5 VDC.Includes 5 VDC power supply. Overall dimensions of barcode scanner 2.9″ x1.9″x1.0″, converter - 4.25″ x 3″ x .75′ (approx). Overall dimensions of converter: 4.50&Prime x 2.90&Prime x 1.00&Prime (approx).

1.795,51 €

Microscan laser, raster, low density, barcode scanner with CVX-1300 data format converter with custom wiring harness

Barcode Scanner with Data Format Converter - Microscan laser, raster, low density, barcode scanner with CVX-1300 data format converter with custom wiring harness. Converter requires 8 - 16 VDC, barcode scanner requires 5 VDC. Includes 5 VDC power supply. Overall dimensions of barcode scanner: 1.80″ x 1.80″ x 0.90″ (approx). Overall dimensions of converter: 4.50″ x 2.90″ x 1.00″ (approx).

TSP-3100

Barcode Scanner with Data Format Converter - Microscan laser, raster, low density, barcode scanner with CVX-1300 data format converter with custom wiring harness. Converter requires 8 - 16 VDC, barcode scanner requires 5 VDC. Includes 5 VDC power supply. Overall dimensions of barcode scanner: 1.80″ x 1.80″ x 0.90″ (approx). Overall dimensions of converter: 4.50″ x 2.90″ x 1.00″ (approx).

3.766,50 €

About Windmill Computing |  Contact Us |  Submit a Return |  Sitemap |  Terms & Conditions |  Cookie Policy

© 2008-2024 Windmill Computing Limited / Registered in England No. 03167398